OSMO One Coat Only HS 0.75L

OSMO One Coat Only HS 0.75L - Wood & Concrete

$34.95

Quantity:

Available Options:
Color:

Description
Specs
Requirements
Images

Details

OS Color Interior/Exterior Wood and Concrete Stains

Exterior and interior use
Transparent
Satin-matt
One coat only* (although we usually use 2 for floors)
Extremely high percentage of solids (85%), high-yield quality
Its high yield quality guarantees a large coverage and covers 200 square feet per liter, what you need is just only one coat.

Soybean, sunflower, linseed, and other natural oils blended with wax create a beautiful, durable finish that won’t crack, flake, peel or blister. OS One-Coat-Only is recommended for a variety of applications, including floors in high-traffic areas. Use OS to seal your concrete floors.

Osmo One-Coat-Only is transparent, available in a variety of colors, gives a smooth finish to any surface, and intensifies the grain and texture of wood. Its high-yield quality guarantees a large coverage. It can be applied without marks and does not dry during the application. The finish is water-repellent, weather- and UV-resistant. Moisture can evaporate, swelling and shrinking are reduced.

Osmo One-Coat-Only can be used as a wood or concrete stain and sealant.

See "Images" Tab for color swatches.

Returns on canned products, such as Velvit Oil, Paint, OSMO, etc., are subject to a case-by-case judgment and in general are returnable only in cases of product malfunction. These products are sensitive to storage conditions as well as exposure to air and heat/cold, and therefore we cannot offer returns on these products unless the product itelf fails to meet product specifications, or at manager's discretion.

Specs

NOW SOLVENT FREE!

Microporous—no condensation problems under opaque finishes. The wood can breathe and moisture can evaporate.
Very economical. Due to the extraordinary high coverage, one can will cover double the area of most other wood finishes: approximately 525 square feet per 2.5 liter.
Easy to apply—no brush marks in hot weather.
Penetrates into the wood surface keeping it elastic and allowing the wood to breathe.
No added biocides or preservatives. Has a shelf life of 5 years.
Easy to clean, resistant to household chemicals.

MADE IN GERMANY UNDER STRICT EUROPEAN ENVIRONMENTAL REGULATIONS

Requirements

More about OSMO One Coat Only

One Coat Only is a semitransparent stain suitable for interior and exterior use. It colors the wood but the grain still shows. This product has an unusually high solids content—85 percent. It covers up to three times as much area as exterior stains with only 15 to 40 percent solids.

Because of its pigments, One Coat Only provides excellent protection against ultraviolet rays from the sun, which destroy wood fibers by degrading the substance (lignin) that holds them together. Dark shades of stain offer more protection against UV than light shades do.

Benefits of OSMO One Coat Only

Environmental benefits include:
· Made mostly from readily renewable, natural ingredients.
· When dry, meets European safety standards for use on children's furniture and toys and resistance to perspiration and saliva.
· Only solvent is aliphatic low-odor mineral spirit, the safest effective solvent available.

Practical benefits include:
· Easy to apply—just one coat.
· High coverage rate—economical.
· Does not raise the grain of wood, so there's no need to sand between coats.
· Won't peel, rub or flake off. Finish resists water, dirt and abrasion.
· Dries to a satin sheen.

How much do I need?

One liter covers approximately 200 square feet.

How to use this product

Preparation

Wood surface must be clean, frost-free and dry (maximum moisture content of 20 percent).

Old paints and varnishes must be removed. Old microporous stains only have to be cleaned.

On new wood, where possible, apply the finish to all sides of the wood before installation. It's easier and neater.

Application

Stir the finish thoroughly. Don't thin.

Use a stiff brush. OSMO brushes are ideal because of their short bristles. Dip the brush into the well-stirred finish and apply in a very thin coat along the line of the wood grain. Brush back and forth to spread out the stain.

Drying

Drying takes about 12 hours.

Cleanup

Clean brushes with mineral spirits or the benzene-free OSMO Brush Cleaner.

Storage

Can be stored for five years or longer.

Freezing doesn't ruin this product. If the can freezes, the finish may thicken. But it will regain normal consistency and be ready to use after two or three days at room temperature.

Safety

Ingredients

85 percent solids (the part of a finish that remains on the wood after the finish dries): natural vegetable oil (sunflower), iron oxide, organic pigments, and white titanium dioxide pigment—all officially approved for use in the food sector in Germany. This finish also contains water-repellent additives and lead-free dryers.

The remaining 15 percent is solvent: aliphatic low-odor mineral spirits that meet the German standard for purity.

WARNING: Spontaneous Combustion Danger!
Oil-soaked materials (rags, steel wool, sanding dust, etc.) may spontaneously combust.
Immerse oil-soaked materials in water and store in an air-tight container.

Material Safety Data Sheet

Images

White Spruce #9211	Rosewood #9264	Fir Green #9242
Oak #9241	Teak #9262	Scandanavian Red #9234
Walnut #9261	Mahogany #9232	Natural Spruce #9222
Red Cedar #9235	Ebony #9271	Pine #9221
Silver Poplar #9212	Patina #9252	Larch #9236

Customers who bought this product also purchased

OSMO One Coat Only HS 2.5L - Wood & Concrete	OS Polyx-Oil (Hardwax Oil) 0.75L	OSMO Floor Brush
Bi-O-Kleen All Purpose Cleaner & Degreaser - Super Concentrated	Citra-Solv Natural Cleaner & Degreaser	OSMO One Coat Only HS 0.375L - Wood & Concrete

We Also Recommend :

OSMO Floor Brush
$44.95